How-to - ORF ICE Karte mit Oscam Newcamd Protokoll via MGcamd updaten
oscam.conf
[CODE][global] nice = -1 WaitForCards = 1 ClientTimeout = 5 CacheDelay = 120
[newcamd]
Key = 0102030405060708091011121314
- wenn ORF mit Austriasat Abo, dann
- Port = 34000@0D95:000004,000008,00000C,000010
- sonst bei nur ORF
34000@0D95:000004
[webif]
httpport = 16002 httpuser = root httppwd = xxx httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255[/CODE]
oscam.server
[CODE][reader] label = ORFICE Protocol = internal detect = CD device = /dev/sci0 Group = 1 EMMCache = 1,3,2 CAID = 0d95
- nur wenn Austriasat Abo auf der Karte aktiv ist
- ident = 0D95:000004,000008,00000C,000010
- wenn nur ORF, dann bitte nur
ident:0D95:000004 [/CODE]
oscam.user
[CODE][account] user = user pwd = pass group = 1 au = ORFICE[/CODE]
MGCAMD Konfiguration in /usr/keys
ignore.list
[CODE]X: { 0D05 } X: { 0648 } X: { 1702 }[/CODE]
priority.list
[CODE]X: { 0D95 }[/CODE]
newcamd.list
[CODE]CWS = 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14[/CODE]
mg_cfg
[CODE]# EMM messages
- 00 don't show any EMMs (default)
- 01 show only valid EMMs
- 02 show valid and bad EMMs with complete data display
M: { 02 }
- ECM messages
- 00 don't show anything about ecm
- 01 normal mode, show pids processed, decoded ecm and cw
- 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
- AU
- 00 disable, no emm pids processed
- 01 enable, emm pids always processed for soft-au and shared cards
- 02 auto, emm started only if channel cant be decoded
- 03 process emm pids for network cards update only
A: { 03 }
- key update (sum 01 or 02 with 04)
- 01 update only new keys, default setting
- 02 update all keys (used for valid PMK checking)
- 04 enable TPS au
- + tps au pid
U: { 05 } 0x1ACB
- config files folder (softcam, autoroll, ignore/priority)
- 00 files in /var/keys
- 01 files in /tmp
T: { 00 }
- network mode, use summ for several clients
- 00 no network (default)
- 01 newcamd netclient
- 02 radegast netclient
- 04 camd3 netclient
- 08 gbox netclient
G: { 09 }
- network retry, use summ for several options
- 00 disable
- 01 retry every new ecm
- 02 try to connect to offline shares every Q: seconds
- 04 try to detect and fast reconnect to lost (and not used atm) server
- + XX messages number and YY seconds to reconnect
- mg will reconnect to server, if no answer to last XX ecm/keepalive or
- if no answer for last ecm or keepalive sent for YY seconds
- set to 0 to disable
N: { 07 } 5 30
- network ecm timeout in seconds
K: { 04 }
- newcamd dead routes connect retry, sec
Q: { 120 }
- network shares priority
- 00 gbox, newcamd, radegast, camd3 (default)
- 01 camd3, radegast, newcamd, gbox
- 02 newcamd, camd3, gbox, radegast
P: { 00 }
- on screen display type
- 00 No OSD (default)
- 01 neutrino
- 02 enigma
- 03 relook
- + user password for http auth
O: { 00 } username password
- on screen display Options, summ of:
- 01 show emu ecm
- 02 show network shares messages
- 04 show decoding failed / fta
- 08 show emm keys update
- + web port to use for osd
S: { 03 } 80
- Log option, summ of:
- 00 off
- 01 network udp log
- 02 log to console
- 04 file, appended ! delete it by yourself, before it eat all your hdd
- + IP udp-port log-file-name
L: { 03 } 192.168.0.124 7025 /tmp/mgcamd.log
- keep ecm cache, seconds
- every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
- for openbox/elanvision users with remote shares make sense to set it higher than default value,
- to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
- cache option, summ of:
- 00 Off (default)
- 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
- 02 Ecm data cache, remember CW for (E:) time
- 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
- reread files, summ of:
- 00 No (default)
- 01 reread config file on channel change (including priority and ignore, but not replace/cache)
- 02 reread SoftCam.Key on channel change
- 04 reread SoftCam.Key if file changed
R: { 00 }
- debug, summ of
- 00 off (default)
- 01 debug ecm
- 02 debug emm
- 04 debug network ecm
- 08 debug network emm
- 16 debug network login
- 32 show mem/cpu stats every 1 min
- 64 add timestamp to log messages
D: { 00 }
- box type
- 00 autodetect, change only if you think wrong type detected.
- 01 dbox2
- 02 dreambox
- 03 triple-dragon
- 04 relook
- 05 openbox
B: { 00 }[/CODE]
Wenn die Karte tatsächlich ganz zu ist und man länger nicht upgedated hat, kann der Updatevorgang bis zu 1 Stunde dauern, das ist auch bei Scam so. Idealerweise schaltet man auf ORF2 (nicht ORF2-HD) und wartet auf die Updates.