How-to - ORF ICE Karte mit Oscam Newcamd Protokoll via MGcamd updaten

Das Board mit Freiheiten

---

oscam.conf

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
 [newcamd]
Key             = 0102030405060708091011121314
# wenn ORF mit Austriasat Abo, dann
#Port            = 34000@0D95:000004,000008,00000C,000010
#sonst bei nur ORF
34000@0D95:000004
 [webif]
httpport = 16002
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server <pre"> [reader] label = ORFICE Protocol = internal detect = CD device = /dev/sci0 Group = 1 EMMCache = 1,3,2 CAID = 0d95

1. nur wenn Austriasat Abo auf der Karte aktiv ist
2. ident = 0D95:000004,000008,00000C,000010
3. wenn nur ORF, dann bitte nur

ident:0D95:000004

oscam.user

[account]
user = user
pwd = pass
group = 1
au = ORFICE

MGCAMD Konfiguration in /usr/keys

ignore.list

X: { 0D05 } 
X: { 0648 } 
X: { 1702 }

priority.list

X: { 0D95 }[/CODE]

newcamd.list

CWS = 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

mg_cfg

[CODE]# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 02 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 03 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps au pid
U: { 05 } 0x1ACB

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 09 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 04 }

# newcamd dead routes connect retry, sec
Q: { 120 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 192.168.0.124 7025 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

Wenn die Karte tatsächlich ganz zu ist und man länger nicht upgedated hat, kann der Updatevorgang bis zu 1 Stunde dauern, das ist auch bei Scam so. Idealerweise schaltet man auf ORF2 (nicht ORF2-HD) und wartet auf die Updates.

(c)by Reppo

[zurück zu Smartcard] [ Zurück zu OScam ]
[ Zurück zu Hauptseite ]