DM7020: Unterschied zwischen den Versionen
Aus Zebradem WIKI
Zur Navigation springenZur Suche springen
Zeile 1: | Zeile 1: | ||
<h1> Allgemein </h1> | |||
Verbesserungen gegenüber der DreamBox 7000S | <p>Verbesserungen gegenüber der DreamBox 7000S | ||
</p> | |||
<ul><li> Ein Leistungsfähigeres Netzteil, das einen stabilen Betrieb mit Festplatten oberhalb von 160GB Grenze garantiert | |||
</li><li> Ein zusätzlicher RF-Antennenmodulator | |||
</li><li> 32MB Flash Memory | |||
</li><li> Analog Modem und DSL-Anschluss | |||
</li><li> 12V Switch Anschluß | |||
</li></ul> | |||
<h1>Details</h1> | |||
<ul><li> 250 MHZ IBM Power PC Processor ( 350 MIPS ) | |||
</li><li> 64MByte Ram ( Arbeitsspeicher ) | |||
</li><li> 2x Smartcard-Leser | |||
</li><li> Festplattenunterstützung bis 300 GB | |||
</li><li> 1xDVB Common-Interface Einschub | |||
</li><li> CF-Reader | |||
</li><li> USB | |||
</li></ul> | |||
<h2> Image für die 7020 </h2> | |||
<p><a href="Enigma">Enigma<sup>1</sup></a> | |||
</p> | |||
<h2> Technische Daten </h2> | |||
<ul><li> 250 MHZ IBM Power PC Processor ( 350 MIPS ) | |||
</li><li> 64MByte Ram ( Arbeitsspeicher ) | |||
</li><li> 32MB Flash Memory | |||
</li><li> 1xDVB Common-Interface Einschub | |||
</li><li> 2x Smartcard-Leser | |||
</li><li> DreamCrypt CA intregriert | |||
</li><li> SPDI/F optischer Anschluß AC-3/DTS | |||
</li><li> 2xScart-Anschluß ( komplett Software-gesteuert ) | |||
</li><li> Integrierter Compact Flash Leser (Einschub von vorne) | |||
</li><li> 1 x USB | |||
</li><li> 100 MBit voll duplex Ethernet Interface | |||
</li><li> Anschluss V.24/RS232 | |||
</li><li> Modemanschluß | |||
</li><li> 12V Switch Anschluß | |||
</li><li> RF-Modulator | |||
</li><li> A/VAusgang | |||
</li><li> integrierter IDE UDMA66 Master/Slave-Anschluß | |||
</li><li> Festplattenunterstützung bis 300 GB | |||
</li><li> MPEG2 Hardware decoding ( voll DVB kompatibel ) | |||
</li><li> groß-formatiges LCD-Display | |||
</li><li> Linux Open Source | |||
</li><li> Unterstützung für Linux Standard API ( Dierect-FB,Linux-FB,LIRC ) | |||
</li><li> unlimitierte Kanalliste für TV/Radio | |||
</li><li> Kanalwechsel in weniger als einer Sekunde | |||
</li><li> voll automatischer Kanalsuchlauf | |||
</li><li> EPG-Unterstützung | |||
</li><li> Videotext Decoder Unterstützung | |||
</li><li> Unterstützung von Mehrfach-LNB-Umschaltung ( unterstützt DiSEqC ) | |||
</li><li> adaptierbares OSD in vielen Sprachen ( Skin-Unterstützung ) | |||
</li></ul> | |||
<h2> Details zu einigen technischen Daten </h2> | |||
<p><b>DBS-Tuner:</b> | |||
</p> | |||
<ul><li> Eingangsfrequenzbereich 950 - 2150 MHz | |||
</li><li> Eingangspegelbereich - 65 dBm - - 25 dBm | |||
</li><li> Rauschmaß 12 dB max. | |||
</li><li> DBS-Tuner Eingang F-Buchse | |||
</li><li> Eingangsimpedanz 75 Ohm | |||
</li><li> AFC-Fangbereich +/- 3 MHz | |||
</li><li> Demodulation Shaped QPSK | |||
</li><li> FEC Viterbi und Reed-Solomon | |||
</li><li> Viterbiraten 1/2, 2/3, 3/4, 5/6, 7/8 | |||
</li><li> Roll-off Factor 35 % | |||
</li><li> Demultiplexing gemäß ISO 13818-1 | |||
</li></ul> | |||
<p><b>Common-Interface:</b> | |||
</p> | |||
<ul><li> Common-Interface Stromverbrauch max. 0,3A/5V | |||
</li></ul> | |||
<p><b>Videodekodierung:</b> | |||
</p> | |||
<ul><li> Videokompression MPEG-2 und MPEG-1 kompatibel | |||
</li><li> Videostandard PAL G/ 25 Hz | |||
</li><li> Bildformat 4:3 / 16:9 | |||
</li><li> Letterbox Filterung für 4:3 TV-Geräte | |||
</li></ul> | |||
<p> | |||
<b>Audiokodierung:</b> | |||
</p> | |||
<ul><li> Audiokompression MPEG-1 & MPEG-2 Layer I und II | |||
</li><li> Audio Mode Dual (main/sub), Stereo | |||
</li><li> Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz | |||
</li></ul> | |||
<p><b>Ausgang Analog:</b> | |||
</p> | |||
<ul><li> Ausgangspegel L/R 0,5 Vss an 600 Ohm | |||
</li><li> THD > 60 dB (1 kHz) | |||
</li><li> Übersprechen < -65 dB | |||
</li></ul> | |||
<p><b>Ausgang Digital:</b> | |||
Leistungsaufnahme: | </p> | ||
<ul><li> Ausgangspegel 0,5 Vss an 75 Ohm | |||
</li><li> Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz | |||
</li><li> S/PDIF-Ausgang optisch (AC3) | |||
</li></ul> | |||
<p>Leistungsaufnahme: | |||
< 20W (im Betrieb, horizontal Polarisation / 400mA LNB Strom) | |||
< 11W (im Betrieb, ohne LNB) | |||
< 1W (Deep-Standby-Mode) | |||
</p><p><b>Eingangsspannung:</b> | |||
250V / 50 Hz Wechselspannung +/- 15% | 250V / 50 Hz Wechselspannung +/- 15% | ||
</p><p><b>Allgemeines:</b> | |||
Umgebungstemperatur +15°C...+35°C | Umgebungstemperatur +15°C...+35°C | ||
Luftfeuchtigkeit | Luftfeuchtigkeit < 80% | ||
Abmessungen (B x T x H): 374 mm x 230 mm x 75 mm | Abmessungen (B x T x H): 374 mm x 230 mm x 75 mm | ||
Gewicht: 1,8 kg ohne HDD | Gewicht: 1,8 kg ohne HDD | ||
</p> | |||
<h2> Wichtige Links </h2> | |||
<p><a href="http://www.zebradem.com/zd224/">ZebraDem - Bei Fragen und Problemen zur DM 7020</a> | |||
</p><p><a href="Hauptseite">[Zurück zu Hauptseite]</a> | |||
</p> | |||
Version vom 22. April 2010, 10:43 Uhr
Allgemein
Verbesserungen gegenüber der DreamBox 7000S
- Ein Leistungsfähigeres Netzteil, das einen stabilen Betrieb mit Festplatten oberhalb von 160GB Grenze garantiert
- Ein zusätzlicher RF-Antennenmodulator
- 32MB Flash Memory
- Analog Modem und DSL-Anschluss
- 12V Switch Anschluß
Details
- 250 MHZ IBM Power PC Processor ( 350 MIPS )
- 64MByte Ram ( Arbeitsspeicher )
- 2x Smartcard-Leser
- Festplattenunterstützung bis 300 GB
- 1xDVB Common-Interface Einschub
- CF-Reader
- USB
Image für die 7020
<a href="Enigma">Enigma1</a>
Technische Daten
- 250 MHZ IBM Power PC Processor ( 350 MIPS )
- 64MByte Ram ( Arbeitsspeicher )
- 32MB Flash Memory
- 1xDVB Common-Interface Einschub
- 2x Smartcard-Leser
- DreamCrypt CA intregriert
- SPDI/F optischer Anschluß AC-3/DTS
- 2xScart-Anschluß ( komplett Software-gesteuert )
- Integrierter Compact Flash Leser (Einschub von vorne)
- 1 x USB
- 100 MBit voll duplex Ethernet Interface
- Anschluss V.24/RS232
- Modemanschluß
- 12V Switch Anschluß
- RF-Modulator
- A/VAusgang
- integrierter IDE UDMA66 Master/Slave-Anschluß
- Festplattenunterstützung bis 300 GB
- MPEG2 Hardware decoding ( voll DVB kompatibel )
- groß-formatiges LCD-Display
- Linux Open Source
- Unterstützung für Linux Standard API ( Dierect-FB,Linux-FB,LIRC )
- unlimitierte Kanalliste für TV/Radio
- Kanalwechsel in weniger als einer Sekunde
- voll automatischer Kanalsuchlauf
- EPG-Unterstützung
- Videotext Decoder Unterstützung
- Unterstützung von Mehrfach-LNB-Umschaltung ( unterstützt DiSEqC )
- adaptierbares OSD in vielen Sprachen ( Skin-Unterstützung )
Details zu einigen technischen Daten
DBS-Tuner:
- Eingangsfrequenzbereich 950 - 2150 MHz
- Eingangspegelbereich - 65 dBm - - 25 dBm
- Rauschmaß 12 dB max.
- DBS-Tuner Eingang F-Buchse
- Eingangsimpedanz 75 Ohm
- AFC-Fangbereich +/- 3 MHz
- Demodulation Shaped QPSK
- FEC Viterbi und Reed-Solomon
- Viterbiraten 1/2, 2/3, 3/4, 5/6, 7/8
- Roll-off Factor 35 %
- Demultiplexing gemäß ISO 13818-1
Common-Interface:
- Common-Interface Stromverbrauch max. 0,3A/5V
Videodekodierung:
- Videokompression MPEG-2 und MPEG-1 kompatibel
- Videostandard PAL G/ 25 Hz
- Bildformat 4:3 / 16:9
- Letterbox Filterung für 4:3 TV-Geräte
Audiokodierung:
- Audiokompression MPEG-1 & MPEG-2 Layer I und II
- Audio Mode Dual (main/sub), Stereo
- Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Ausgang Analog:
- Ausgangspegel L/R 0,5 Vss an 600 Ohm
- THD > 60 dB (1 kHz)
- Übersprechen < -65 dB
Ausgang Digital:
- Ausgangspegel 0,5 Vss an 75 Ohm
- Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz
- S/PDIF-Ausgang optisch (AC3)
Leistungsaufnahme: < 20W (im Betrieb, horizontal Polarisation / 400mA LNB Strom) < 11W (im Betrieb, ohne LNB) < 1W (Deep-Standby-Mode)
Eingangsspannung:
250V / 50 Hz Wechselspannung +/- 15%
Allgemeines:
Umgebungstemperatur +15°C...+35°C Luftfeuchtigkeit < 80% Abmessungen (B x T x H): 374 mm x 230 mm x 75 mm Gewicht: 1,8 kg ohne HDD
Wichtige Links
<a href="http://www.zebradem.com/zd224/">ZebraDem - Bei Fragen und Problemen zur DM 7020</a>
<a href="Hauptseite">[Zurück zu Hauptseite]</a>