WB Smartmouse USB
* USB2.0
* Programmer, inkl. Gehäuse & Software. Kein Netzteil erforderlich, Stromversorgung über USB. USB Kabel erforderlich.
* 3.58, 3.68 und 6.00 MHz
* unterstützt Smartmouse und Phoenix Modus
* unterstützt standard ftdi_sio Treiber für Windows und Linux Applikationen
* Stromversorgung über USB
Smusbutil wird folgendermaßen ausgeführt
./smusbutil 6000 smartmouse
Einstellungen
- CCcam
SERIAL READER : /dev/ttyUSB0
- Oscam
protocol = mouse
Beispiel : UM02 Karte mit oscam betreiben
oscam.server
[reader]
label = smartmouse
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1838
detect = cd
rsakey = B5...........FF
boxkey = A7..........7C
cardmhz = 368
group = 1
lb_weight = 100