Emu - Was kommt in welches Verzeichnis?: Unterschied zwischen den Versionen

Aus Zebradem WIKI
Zur Navigation springenZur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 35: Zeile 35:
  AutoRoll.key  
  AutoRoll.key  


Evocamd
==Evocamd==
Keys directory:  
*Keys directory: /var/keys  
/var/keys
Autoupdate.Key, Keylist.txt  
Autoupdate.Key, Keylist.txt  
*Emu file (binary):/var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
Program files:  
evocamd (ppc = dbox2, DM 500-7020 ; mips = DM 7025; sh4 = Kathrein); CHMOD 755
/var/bin
*Config files: /var/keys
evocamd  
camd_cfg  
Config files:
*CS Client config file: /var/keys
/var/keys
newcamd-client.txt  
camd_cfg  
*AU files: /var/keys
CS Client config file:
AutoUpdate.key
/var/keys
 
newcamd-client.txt  
AU files:
/var/keys
AutoUpdate.key
/var/scce/


==camd3==
==camd3==
Zeile 78: Zeile 73:


==scam==
==scam==
Keys directory:  
*Keys directory: /var/keys
/var/keys
seca2, nagra, via, irdeto, conax  
seca2, nagra, via, irdeto, conax  
*Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
Program files:  
scam  
/var/bin
*Config files: /var/keys
scam  
softcam.cfg  
Config files:
*CS Client config file: /var/scam
/var/keys
cw_servers  
softcam.cfg  
*AU files: /var/keys
CS Client config file:
seca2 /nagra_rom
/var/scam
cw_servers  
AU files:
/var/keys
seca2
/nagra_rom





Version vom 11. Oktober 2011, 07:58 Uhr


Das Board mit Freiheiten





Hier mal eine Übersicht aus der hervorgeht, welche Datei in welches Verzeichnis kommt:

NewCS

  • Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
newcs CHMOD 755
  • Config files: /var/tuxbox/config
newcs.xml, newcamd.conf 

Newcamd

  • Keys directory: /var/(tuxbox)/scce
constantcw, keylist, ppua, rsakeylist & tpscrypt 
  • Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
newcamd, cardserv, cardspider, betadserv 
  • Config files: /var/tuxbox/config/newcamd
newcamd.conf, cardserv.cfg, betad.cfg 

MGcamd

  • Keys directory: /var/keys
SoftCam.key, AutoRoll.key 
  • Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
mgcamd 
  • Config files: /var/keys
mg_cfg 
  • AU files:/var/keys
AutoRoll.key 

Evocamd

  • Keys directory: /var/keys
Autoupdate.Key, Keylist.txt 
  • Emu file (binary):/var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
evocamd (ppc = dbox2, DM 500-7020 ; mips = DM 7025; sh4 = Kathrein); CHMOD 755
  • Config files: /var/keys
camd_cfg 
  • CS Client config file: /var/keys
newcamd-client.txt 
  • AU files: /var/keys
AutoUpdate.key


camd3

  • Keys directory: /var/keys
camd3.keys 
  • Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
camd3 (ppc = dbox2, DM 500-7020 ; mips = DM 7025; sh4 = Kathrein); pcamd CHMOD 755
  • Config files: /var/keys
camd3.config, camd3.users, camd3.servers CHMOD 644
  • AU files: /var/keys
seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys CHMOD 644


CCcam

  • Keys directory:/var/keys
SoftCam.Key, AutoRoll.Key, constant.cw CHMOD 644
  • Emu file (binary): /var/bin (kann variieren, z. B. ZD-Image /var/emu; für DM 7025 /usr/bin)
CCcam (.ppc = dbox2, DM 500-7020; .mips = DM 7025, DM800, DM8000; .x86 = PC @Linux); capmtserver; CHMOD 755
  • Config files: /var/etc
CCcam.cfg 
optional: CCcam.prio, CCcam.providers, CCcam.channelinfo; CHMOD 644
  • AU files: /var/keys
AutoRoll.Key CHMOD 755


scam

  • Keys directory: /var/keys
seca2, nagra, via, irdeto, conax 
  • Emu file (binary): /var/bin (kann variieren, z. B. MD-Image /var/emu; für DM 7025 /usr/bin)
scam 
  • Config files: /var/keys
softcam.cfg 
  • CS Client config file: /var/scam
cw_servers 
  • AU files: /var/keys
seca2 /nagra_rom


Radegast Keys directory: /var/keys SoftCam.Key, AutoRoll.Key Program files: /var/bin rdgd camd, rdgd, netpilot Config files: /var/etc radegast.cfg CS Client config file: /var/etc radegast.cfg

CamX Keys directory: /var/keys Softcam.key Program files: /var/bin camx, server Config files: /var/bin camx.config CS Client config file: /var/bin camx.config AU files: /var/keys

Dream BISS Program files: /var/bin biss